币游国际官网

宏展科技无限公司 主营:高温尝试箱(紧密烘箱)、凹凸温尝试箱(温度箱)、凹凸温交变干冷尝试箱(恒温恒湿箱)、恒温恒湿尝试箱、疾速温度变更尝试箱、三综合应力挑选尝试箱、步入式温度(湿度)尝试室、温度打击尝试箱、凹凸温打击尝试箱、冷热打击尝试箱、凹凸温低气压(高度)尝试箱、可程式恒温恒温湿尝试机、可程式恒温尝试机、桌上型恒温恒湿尝试机、可程式紧密烘箱、无氧化烘箱、无尘烘箱、可程式恒温恒温室、冷热打击尝试机、疾速起落温恒湿式验机、盐水喷雾尝试机、紫外老化尝试箱、太阳能测试装备、LED测试装备、LCD测试装备。

紫光芒天气老化测试箱

  • 若是您对该产物感乐趣的话,能够
  • 产物称号:紫光芒天气老化测试箱
  • 产物型号:Q8/UV3
  • 产物展商:宏展科技(重庆)无限公司
  • 产物文档:无相干文档
简略先容

Q8供给两种湿润摹拟体例。操纵*多的是冷凝体例,它是摹拟户外湿润侵蚀的*好体例。一切的Q8型号都可运转冷凝轮回。因为有些操纵前提也请求操纵水喷淋以到达现实的结果,以是有些Q8型号既可运转冷凝轮回又可运转水喷淋轮回。

产物描写
  • 币游国际官网: 

    紫光芒老化测试箱产物用处:
    紫外线是致使几近一切裸露于户外的资料发生降解的首要缘由。Q8老化尝试机摹拟太阳光中的紫外线局部,UVA-340灯管可*佳摹拟太阳光的短波段。它出格合用于比拟差别品种聚合物和不变剂之间的机能差别。它是用于资料相干性研讨的*好的灯管。
    紫光芒老化测试箱产物先容:
    紫外光与阳光摹拟
    紫外光是形成户外产物来临解感化的首要身分。Q8的荧光紫外灯可摹拟阳光中*首要的短波紫外光,再现光照引发的资料物理机能的老化。按照差别的测试前提,有几种差别的紫外灯管可供挑选。
    Q8灯管  
    UVA-340
    灯管. UVA-340 灯管可极好地摹拟太阳光中的短波紫外光,即从365 纳米到太阳光停止点 295 纳米的波长规模。
    UVB-313灯管. UVB-313 灯管收回的短波紫外光比凡是照耀在地球外表的太阳紫外线激烈,从而能够*大水平的加快资料老化。但是,该灯管能够会对某些资料形成不合适现实的粉碎。UVB-313 灯管首要用于品质节制和研讨开辟,或对耐候性极强的资料运转测试。
    Q8 湿润摹拟
    Q8供给两种湿润摹拟体例。操纵*多的是冷凝体例,它是摹拟户外湿润侵蚀的*好体例。一切的Q8型号都可运转冷凝轮回。因为有些操纵前提也请求操纵水喷淋以到达现实的结果,以是有些Q8型号既可运转冷凝轮回又可运转水喷淋轮回。
    冷凝
    在良多户外情况中,资料天天的湿润时候可长达12小时。研讨标明形成这类户外湿润的首要身分是露珠,而不是雨水。Q8经由过程怪异的冷凝功效来摹拟户外的湿润侵蚀。在冷凝轮回中,经由过程加热尝试机底部水盘来发生水蒸汽。热的水蒸汽使尝试箱在较高温度下坚持100%绝对湿度。Q8的设想中,试样现实上组成尝试箱的侧壁,试样的反面裸露在尝试室室内氛围中。室内氛围的冷却感化致使试样外表温度比水蒸汽温度低几度,从而保障水蒸汽会持续不时地在样品外表固结。这类冷凝水是很不变的纯洁蒸馏水。
    水喷淋
    在某些现实操纵前提下,比方阳光下,堆积的热量因为突降的阵雨而敏捷消失时,资料的温度就会发生急剧变更,发生热打击,这类热打击对很多资料而言是一种磨练。Q8的水喷淋能够摹拟热打击和/或应力侵蚀。
    氙灯耐候尝试产物特点:

    币游国际官网:产物特点:

     
    a.无段调剂UV灯灯管输入照度
     
    b.天下首创UV灯灯管照度衰减主动抵补调剂,免除手动校订与操纵校订灯管
     
    c.USB随身碟接口记实多轨温湿度电压电流曲线文件(7轨物理量记实)。
     
    d.具有伺服加湿体系,有用节制测试区光源发烧负载。
     
    e.灯管降温用水其水质、水温侦测。
     
    f.UV灯灯管自行研发设想把握关头手艺。
     
    g.在短短的几天或几周内,Q8可再此刻几个月乃至几年的户外操纵所呈现的粉碎。
    规范请求:
    a.知足规范请求,尝试竣事体例可单选或复选[照耀积累时候]与[照耀积累量]。
     
    b.雨淋水温合适规范请求可设定。
     
    c.合适ISOASTM DINJISSAEBSANSIGMU.S.GOVT等规范和国标。
    宁静掩护:
    a.尝试竣事待测品回常温掩护机制
     
    b.尝试机台具有35点表里宁静掩护侦测(内部14点,内部31点)
    节制器**:
    a.静态及时变更法式编辑曲线
     
    b.温湿度设定前提防呆掩护
     
    c.机台从头来电尝试曲线不间断
     
    d.AI(野生智能)+Fuzzy(恍惚节制)手艺
     
    e.繁简体中文、英文三种画面语系切换
     
    f.节制体系及时显现多轨温湿度电压电流尝试曲线[温度、湿度、黑球温度、水温、
      灯管电压、灯管电流、灯管照度]。

    币游国际官网: 

    紫光芒老化测试箱节制器:
     

     
    温湿度节制器
     
    * TEMI880
    高分辩?黑色触摸屏接口
    交互式参数输入体例
    撑持韩文,英文,中文
    供给内置SMPSI/O RELAY BOARD-接线简化和节流本钱
    同时撑持干湿球体例及电子湿度传感器
    基于PC的便利监控
    便利设定多达33种的输入(内置计时器)体例
    撑持操纵UDC300(选项)USB存储器-可取代记实器
    内置基于进步前辈的PID算法的主动调谐功效
    供给强无力的通信情况和撑持99台多分支布局
    **的Fuzzy功效和ARW启动-按捺超程
    显现PV曲线(0~8)

    币游国际官网: 

    紫光芒老化测试箱手艺规格:

    型号 Model

     
    UV3
    UV2
    UV1
    UV 照耀 Exposure
    冷凝 Condensation
    光照节制 Irradiancs Control
     
    可调光芒 Adjustable irradiance
     
    喷水 Water Spray
     
     
    热打击 Thermal Shock
     
     
    主动侦路 Self-diagnostics
    灯胆数目 Lamp Q'ty
    紫外线灯管 8 支,备品 4 Ultravloiet lamp 6pcs, spares 4 pcs
    记实器 Recorder
    选配 (Optional)
    辐射计 CR-10 Calibration Radiometer
    选配 (Optional)
    UV 温度 Temp
    50 -75
    冷凝温度 Condensation Temp
    40 -60
    测试容量 Test Capacity
    48pcs /se  spray( 75 x 150m m )
    50pcs/basic ( 75 x 150m m )
    水凉及耗量 Water
    蒸馏水每分钟蒸馏水逐日 8 公升
    体积 Dimension(W x D x H)
    137 x 53 x 136cm
    分量 Weight
    136kg
    电源 Power
    1 ψ 120V/60Hz,16A or 230V/50Hz, 9A,1800W(max)

    币游国际官网: 

     
    紫光芒老化测试箱相干测试体例::
     紫外耐候尝试相干测试体例::

    币游国际官网:通用

     
    ·                     ISO 4892-1 Plastics- Methods of exposure to laboratory light sources-Part 1: General Guidance
    ·                     ASTM G-151, Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
    ·                     ASTM G-154, Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Non-Metallic Materials
    ·                     British Standard BS 2782: Part 5, Method 540B (Methods of Exposure to Lab Light Sources)
    ·                     SAE J2020, Accelerated Exp. of Automotive Exterior Materials Using a Fluorescent UV/Condensation Apparatus
    ·                     JIS D 0205, Test Method of Weatherability for Automotive Parts (Japan)
    ·                     GB/T 16422.1,塑料尝试室光源裸露尝试体例1局部:总则

    币游国际官网: 

    币游国际官网:涂料

     
    ·                     ISO 11507, Paints & varnishes-Exposure of coatings to artificial weathering-Exposure to fluorescent UV and water
    ·                     ISO 20340, Paints & varnishes –Performance requirements for protective paint systems for offshore and
         related structures
    ·                     ASTM D-3794, Standard Guide for Testing Coil Coatings
    ·                     ASTM D-4587, Standard Practice for Light/Water Exposure of Paint
    ·                     US Government, FED-STD-141B
    ·                     US Govt., Federal Specification TT-E-489H, Enamel, Alkyd, Gloss, Low VOC Content
    ·                     US Govt., Federal Specification TT-E-527D, Enamel, Alkyd, Lusterless, Low VOC Content
    ·                     US Govt., Federal Specification TT-E-529G, Enamel, Alkyd, Semigloss, Low VOC Content
    ·                     US Govt., Federal Specification TT-P-19D Paint, Latex, Acrylic Emulsion, Ext. Wood & Masonry
    ·                     NACE Standard TM-01-84 Procedures for Screening Atmospheric Surfaced coatings
    ·                     GM4367M Topcoat Materials - Exterior
    ·                     GM 9125P Laboratory Accelerated Exposure of Automotive Material
    ·                     Korean Standard M5982-1990, Test Method for Accelerated Weathering
    ·                     Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps
    ·                     Israeli Standard No. 330, Steel Windows
    ·                     Israeli Standard No. 385, Plastic Windows
    ·                     Israeli Standard No. 935, Road Marking Paint
    ·                     Israeli Standard No. 1086, Aluminum Windows
    ·                     NISSAN M0007, Fluorescent UV/Condensation Test
    ·                     JIS K 5600-7-8, Testing Methods for Paints
    ·                     MS 133: Part F16, Methods of Test for Paints and Varnishes: Part F16: Exposure of Coatings to Artificial Weathering- Exposure to Fluorescent UV and Water (ISO 11507)
    ·                     NBR-15.380 Paints for buildings–Methods for performance evaluation of paints for non-industrial buildings – Resistance to UV irradiation/water vapor condensation, by accelerated test
    ·                     prEN 927-6 Paints & varnishes–Coating materials and coating systems for exterior wood – Pt. 6: Exposure of wood coatings to artificial weathering using fluorescent UV and water
    ·                     GB/T 12967.4,铝及铝合金阳极氧化着色阳极氧化膜耐紫外光机能的测定

    币游国际官网: 

    币游国际官网:纺织品

     
    ·                     AATCC Test Method 186, Weather Resistance: UV Light and Moisture Exposure
    ·                     ACFFA Test Method for Colorfastness of Vinyl Coated Polyester Fabrics

    币游国际官网: 

    币游国际官网:印刷油墨

     
     
    ·                     ASTM F1945, Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting

    币游国际官网: 

    橡胶

     
     
    ? GB/T 16585,硫化橡胶野生天气老化(荧光紫外灯)尝试体例

    币游国际官网: 

    电工电子产物

     
     
    ? GB/T 19394,光伏(PV)组件紫外尝试
    type the link here

    币游国际官网: 

    币游国际官网:粘合剂和密封剂

     
    ·                     ASTM C 1501, Standard Test Method For Color Stability of Building Construction Sealants as Determined byLaboratory Accelerated Weathering Procedures
    ·                     ASTM C-1184, Specification for Structural Silicone Sealants
    ·                     ASTM C-1442, Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
    ·                     ASTM D-904, Standard Practice for Exposure of Adhesive Specimens to Artificial Light
    ·                     ASTM D-5215, Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
    ·                     American Plywood Assn., Approval Procedures for Synthetic Patching Materials, Section 6
    ·                     Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps

    币游国际官网: 

    币游国际官网:塑料

     
    ·                     ISO 4892 Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps
    ·                     DIN 53 384, Testing of plastics, Artificial Weathering and Exposure to Artificial Light
    ·                     Spanish Standard UNE 53.104 (Stability of Plastics Materials Exposed to Simulated Sunlight)
    ·                     Israeli Standard No. 385, Plastic Windows
    ·                     JIS K 7350, Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps
    ·                     ASTM D-1248, Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
    ·                     ASTM D-4329, Standard Practice for Light/Water Exposure of Plastics
    ·                     ASTM D-4674, Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor
         Fluorescent Lighting and Window-Filtered Daylight
    ·                     ASTM D-5208, Standard Practice for Exposure of Photodegradable Plastics
    ·                     ASTM D-6662,  Standard Specification for Plastic Lumber Decking Boards
    ·                     ANSI C57.12.28 Specification for Accelerated Weathering of Padmounted Equipment Enclosure Integrity
    ·                     ANSI, A14.5 Specification for Accelerated Weathering of Portable Reinforced Plastic Ladders
    ·                     Edison Electrical Inst. Specification for Accelerated Weathering of Padmounted Equip. Enclosure Integrity
    ·                     Wisconsin Electric Power Specification for Polyethylene Signs
    ·                     GB/T 18950,橡胶和塑料软管静态下耐紫外线机能测定
    ·                     GB/T 16422.3,塑料尝试室光源裸露尝试体例3局部:荧光紫外灯

    币游国际官网: 

    币游国际官网:屋顶资料

     
    ·                     ASTM D-4799, Test Method for Accelerated Weathering of Bituminous Roofing Materials
    ·                     ASTM D-4811, Standard Specification for Nonvulcanized Rubber Sheet Used as Roof Flashing
    ·                     ASTM D-3105, List of Test Methods for Elastomeric and Plastomeric Roofing & Waterproofing
    ·                     ASTM D-4434, Standard Specification for PVC Sheet Roofing
    ·                     ASTM D-5019, Standard Specification for Reinforced Non-Vulcanized Polymeric Sheet Used in Roofing Membrane
    ·                     ANSI/RMA IPR-1-1990 Req. for Non-Reinforced Black EPDM Sheet for Roofing Membrane
    ·                     ANSI/RMA IPR-2-1990 Req. for Fabric-Reinforced Black EPDM Sheet for Roofing Membrane
    ·                     ANSI/RMA IPR-5-1990 Req. for Non-Reinforced Non-Black EPDM Sheet for Roofing Membrane
    ·                     ANSI/RMA IPR-6-1990 Req. for Fabric-Reinforced Non-Black EPDM Sheet for Roofing Membrane
    ·                     British Standard BS 903: Part A54 Annex A & D, Methods of Testing Vulcanized Rubber
    ·                     CGSB-37.54-M, Canadian General Standards Board Spec. for PVC Roofing & Waterproofing Membrane
    ·                     DIN EN  534, Corrugated bitumen sheets
    ·                     EOTA TR 010, Exposure procedure for artificial weathering
    ·                     RMA Specification for Reinforced Non-Vulcanized Chlorosulfonated Polyethylene Sheet for Roofing Membrane

    币游国际官网: 

广东宏展科技无限公司
 
Guangdong Hongzhan Technology Co.,Ltd.
 
Tel:   400-0000-217
 
Fax:
 
E-mail:info@oven.cc      http://www.oven.cc

产物留言
标题
接洽人
接洽德律风
内容
考证码
点击换一张
注:1.能够操纵快速键Alt+S或Ctrl+Enter发送信息!
2.若有须要,请您留下您的具体接洽体例!
Copyright@ 2003-2021  宏展科技无限公司版权一切      德律风: 传真: 地点:Lab Companion Park, Changping Town ,Dongguan City,Guangdong Province,China 邮编: